Our company is offering Aggregate Testing
Equipment, which is used for determining the resistance of aggregates to
wear by abrasion. Two specimens can be mounded simultaneously and then kept
loaded by weight against a machined flat circular grinding surface.
Thickness & Length Gauge
We are engaged in offering Thickness & Length
Gauge, which are used in diverse applications such as soil analysis, cement
& concrete industry rock & aggregate testing and ceramics. These are
also used to measure sample sizes of aggregates, sand and fillers.
Specifications:
Determination of flakiness & elongation
ASEW-203
Constructed of heavy gauge sheet steel with chromium plating as per IS :
2386 (Part-1)
Specific Gravity, Density, Voids, Absorption &
Bulking Testing Machines
Our company is engaged in manufacturing and
supplying a wide range of Specific Gravity, Density, Voids, Absorption &
Bulking Testing Machines, which is available in various sizes, heights and
diameters as per the clients’ specific requirements. These are
manufactured of heavy gauge sheet fitted with handles.
Specifications:
Specific gravity, density, voids, absorption &
bulking
ASEW-205
- Density Basket, 20 cm dia x 20 cm high fitted with galvanized wire
mesh with handle. IS: 23 86 (Part III).
ASEW-206
Cylindrical Metal Measures :
IS :2386 (Part-Ill). Made of heavy gauge sheet fitted with handles.
 |
| Nominal |
I.Dia |
I.height |
Thickness |
| Capacity |
|
|
Min. |
| 3 litre |
15cms |
17 cms |
3.15mm |
| 15 ltr. |
25 cms |
30 cms |
4.00 mm |
| 30 ltr. |
35 cms |
31 cms |
5.00 mm |
|
|
ASEW-207
- Metal Measures: IS: 1199
- For determining the unit weight of aggregate. Consists of one each of
10 liters and 20 ltr. Capacity fitted with handles
ASEW-208
- Pycnometer of about 1 Kg capacity fitted with cone, locking ring with
rubber seal as per IS:2386 (Part-Ill)
ASEW-208A
- Density Bottles. Supplied complete with capillary vent stopper,
confirms to BS 733.cap.25ml,50ml& 100 ml.
ASEW-209
- Sand absorption cone and tamper : Consists of a conical metal mould
and a metal tamping rod having circular tamping face 25 mm dia as per
ASTM C 128,AASHO.T84
Hydraulic Jacks
We are a leading manufacturer and supplier of a wide
range of Hydraulic Jacks, which is widely used in the automotive industry.
The jacks are supplied complete with manually operated pumping units fitted
with bourdon tube type hydraulic pressure gauge and a copper connecting tube
or rubber flexible hose pipe.
Specifications:
ASEW-210
- Hydraulic Jack, Hand operated : Remote control type.
- Hydraulic jacks are of multipurpose utility i.e. application of loads
while engaged in field investigation, determination of load carrying
capacity of piles in the field, tensioning of wires in pre-cast
structures, loading of members of any structure for deformation
characteristics etc. The Jacks are supplied complete with manually
operated pumping units fitted with Bourdon tube type Hydraulic pressure
gauge and a copper connecting tube or rubber flexible hose pipe.
- Lift of the ram - 150 mm Pressure gauge - MASTA/WIKA (Pressure gauge
have normally 200 divisions for fully capacity, e.g. 100 tonne x 500 kg
divisions).
- Capacities available:
- 10 Tonne Capacity
- 20 Tonne Capacity
- 25 Tonne Capacity
- 50 Tonne Capacity
- 100 Tonne Capacity
- 150 Tonne Capacity
- 200 Tonne Capacity
ASEW-211
- Hydraulic Jacks, Bottle TYPE Hydraulic Lifting Jacks-Complete with
integral Pumping unit. Release valve provided on the base plate.
Complete with operating handle. Hydraulic lift - 150 mm and Extension
Screw - 150 mm
- All Jacks are without pressure gauge.
- 5 Tonne Capacity
- 10 Tonne Capacity
- 20 Tonne Capacity
- 25 Tonne Capacity
- 30 Tonne Capacity
- 50 Tonne Capacity
- 100 Tonne Capacity
- Accessories : Hydraulic Pressure Gauge
