|
|
Compression Testing Machine |
|
Concrete
Product code : ASEW_093
ASEW -091
Compression Testing Machine, hand operated, 250 KN (25 tonne),
Channel Model: double plunger pump with hydraulic load gauge.
ASEW -092
Compression Testing Machine, hand operated, 500 KN (50tonne),
Channel Model: double plunger with hydraulic pressure gauge of 0-500 KN capacity.
ASEW -093
Compression Testing Machine, hand operated 1000 KN (100 tonne),
Channel Model: fitted with double plunger pump with hydraulic Load gauge 0-1000 capacity
|
|
Concrete
Product code : ASEW_144
ASEW -144
Specific Gravity (density) apparatus, BS: 1881 – 114, / Buoyancy Balance.
Consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The Electronic Digital Balance 10kg X 0.5 gram supplied with frame, water tank suspension hook, wire basket 200 x 200 mm.
|
|
Concrete
Product code : ASEW_140
ASEW -140
Concrete Penetrometer, Spring type. IS: 8142, ASTMD 1558
Consists of cylindrical spring with plunger attached to the top of the spring, Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg/ div, to a maximum cap of 60 kg, which can be read with respected to the top end of the spring housing, complete with set of seven needle pointers in a nice wooden carrying case.
|
|
Concrete
Product code : ASEW_135
ASEW -134
Flow Table: IS: 1199, AASHT T126, BS 4551 - ! ASTM C230
The Flow Table determining the flow of Portland cement concrete Consists of Flow table hand Top is 76.2 cms (30”) dia, finally machined from a solid casting. The stand is fabricated out of cast iron/ M. steel and is of sturdy construction. The ground and hardness steel cam is designed to drop the table by 12.5 mm. complete with Flow mould with handles with one tamping rod 0-60 long x 16 mm dia. Hand operated.
ASEW -135
Flow Table, Motorised.
Similar to item No 134, but electrically operated suitable for operation on 230 Volts, Single phase 50 cycles. A.C. supply.
Spares:
* A Flow Mould made of gunmetal, IS: 1199
* Tamping Bar
|
|
Concrete
Product code : ASEW_094
ASEW -094
Compression Testing Machine, hand operated 1000KN (1000 tonne), 4- Pillar Model, Fitted with double plunger pump and hydraulic Load gauge 0-1000 KN of 200 mm dia. Portable Model. Top and bottom Fibre Cover.
ASEW -095
Compression Testing Machine, hand operated 2000KN (200 tone),
Channel mode: fitter with double plunger pump and hydraulic Load gauge 0-2000 KN cap
ASEW -096
Compression Testing Machine, hand operated. 2000 KN (200 tonne). 2 or 4 Pillar model, with separate pumping unit connected by a copper/ rubber hose pipe, double plunger with pressure gauge 0-2000 KN capacity
|
|
Concrete
Product code : ASEW_124
ASEW -112
Cube Mould, 5cm x 5cm with base palate. Made of Cast iron/ M. Steel
ASEW -115
Cube Mould, 10 cm x 10 cm with base palate. Made of Cast iron
ASEW -116
Cube Mould, 15cm x 15cm with base palate. Made of Cast iron
ASEW -117
Cube Mould, 20cm x 20cm with base palate. Made of Cast iron
ASEW -118
Cube Mould, 30cm x 30cm with base palate. Made of Cast iron
ASEW -124
Briquette Mould, made of gunmetal with M. steel base plate. IS: 269
a. Single Gang with base plate
b. Three Gang on a single base plate
|
|
Concrete
Product code : ASEW_102
ASEW -097
Compression Testing Machine, 250 KN (25 tonne)
Electrically – cum – manually operated. TWO/ FOUR PILLER MODEL.
ASEW -098
Compression Testing Machine, 500 KN (50 tonne)
Electrically – cum – manually operated. TWO/ FOUR PILLER MODEL.
ASEW -099
Compression Testing Machine, 1000 KN (100 tonne) cap.
Electrically – cum – manually operated. TWO/ FOUR PILLER MODEL.
ASEW -100
Compression Testing Machine, 1000 KN (100 tonne) cap
Electrically – cum – manually operated. TWO/ FOUR PILLER MODEL: with two pressure gauge i.e. 0-500 KN x 2.5 divn. And 0-1000 KN x 5 KN/ divn.
ASEW -101
Compression Testing Machine, 2000 KN (200 tonne) cap
Electrically – cum – manually operated. TWO/ FOUR PILLER MODEL.
ASEW -102
Compression Testing Machine, 2000 KN (200 tonne) cap
Electrically – cum – manually operated with two load gauge 2 or 4 Pillar Model. O- 1000 KN x 5 KN/ divn. And 0-200 KN x 10 KN. divn.
ASEW -103
Compression Testing Machine, 2000 KN (200 tonne) cap
Electrically – cum – manually operated with 3 gauges 2 of 4 Pillar Model. 0-500 KN x 2.5 KN, O-1000 KN x 5 KN/div. and 0-2000 KN x 10 KN/ divn.
ASEW -104
Compression Testing Machine, Digital KN x 1 KN least count
ASEW series Compression Testing machine are the finest of there type obtainable, The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. ASEW Compression Testing Machine conforms, to the requirements international Standards like BS ASTM & Indian Standardise IS: 516.
High Stability, Self Aligning Platen Suitable for Testing Cubes and Cylinders of various sizes. Brick can also be tested. Digital having function of peak hold facility, memory status, automatic cui-off of maximum Load, Alarm generated when the sample breaks down, Cubes of size 50 mm 200 mm can be tested. Cylinders 100 mm x 200 mm ht. & 150 mm dia. x 300 mm ht. can be tested.
NOTE: You can get digital Readouts in all Machine ca. 250 KN to 3000 KN.
ASEW -105
Compression Testing Machine. Digital 2000 KN x 1 KN least count fitted with additional pressure gauge 2000 KN x 10 KN/Div.
ASEW -107
Compression Testing Machine. (3000 KN cap., electrically-cum manually operated. 2 or 4 PILLAR MODEL.
ASEW -108
Compression Testing Machine, 3000 KN. (300 tonne) cap.
Electrically-cum-manually operated. 2 or 4 PILLER MODEL: with three Load gauge 0-1000 KN x 5 KN/ div, 0-2000 KN X 10 KN/ div and 0-3000 KN x 15 KN div.
ASEW -109
Compression Testing Machine, 3000KN cap x IKN
Electrically with Digital Display. 440V, 3 Phase, 50 cycles, AC supply.
Accessories
* Brick Plated. Set of 2
* Load gauge 150 mm dia. For Manually CTM
* Load gauge 200 mm dia. For Electrically CTM
* Flexural attachment for 100 x 100 x 500 mm Beams and 150 x 150 x 700 mm beam as per IS: 516
* Dummy with Red needle for Load gauge
* Spacer Block for 1000 KN machine
* Spacer Block for 2000 KN machine
* Hydraulic Pump 100 tonne for Potable CTM hand
* Hydraulic Pump for 100 tonne machine hand operated
* Hydraulic Pump for 200 tonne machine hand operated
(Table of page no 17)
TECHNICAL SPECIFICATIONS FOR 500KN, 1000KN, 2000KN, 3000KN, HYDRAULIC COMPRESSION TESTERS Electrically Cum manually Operated: IS: 516- 1959
(TWO/ FOUR PILLAR MODEL)<
|
|
Concrete
Product code : ASEW_132
ASEW -130
Vibrating Table for compaction concrete cube, cylinders. The Table Deck size 50cm x 50 cm and has stops along its edges to prevent Moulds from walking oil the table during vibration. The variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or "decreasing the frequency, The vibrator is mounted on a cushioned steel vibrating deck, A switch is provided for starting the motor operation on 44 V, 3 phase, A.C supply. CABINHT
TYPE.
Vibrating Table, Table top 60 cm x 60 cms
Vibrating Table, Table top 75 cms x 75 cms
Vibrating Table top, 1 meter x 1 meter
|
|
|
|
|
