Home | Profile | Contact Us | Enquiry
English Deutsch Español Français Portuguese Arabic
 
 
Our Products
Search Product :
 
 


Cement Concrete

Cement Concrete

Cement Concrete

Product code :    ASEW_176
 
ASEW -176
Vicat Needle apparatus, IS: 5513, IS: 2542 (part-2), 2645, 1727, BS: 12,146,915,1370,4027,4246, 4248, ASTM C-91, C-141, C-187, C-308, C-359, C-472 & AASHTO T-129, E-131. Consists of a metallic frame bearing a movable rod with cap at one end and a vicat mould 70 mm in dia at the base, 50 mm at the top and 40 mm high and with a glass base plate. Consistency plunger, initial and final needles in a nice jewellery case


ASEW -177
Vicat Needle Apparatus with Dash pot. Similar to ASEW-176, but fitted with dashpot to facilitate the gentle lowering of the needle.
* Consistency plunger
* Initial Needle
* Final Needle
* Vicat mould made of gunmetal
* Jewellery box

Cement Concrete

Cement Concrete

Product code :    ASEW_173
 
ASEW -172
Permeability Tests: IS: 1727; IS: 1645: Consists of: Specimen container ring of 100 mm diameter and50 mm high, held between a bottom plate and a water cell. The Water cell of 100 mm diameter brass cylinder and the top and bottom plates of brass or any other non-corroding metal. Each cell with collar is clamped in between a base plate and a top plate with the help of tension rods and nuts. The cell assembly is mounted on the stand. The top plate is provided with an inlet and air release vent and the base plate is provided with an outlet. Complete with a pressure chamber is fitted with a pressure, and a pressure gauge 0-10 kg/cm2 indicating the chamber pressure,

* Three Cell Model with Air compressor
* Six Cell Model with Air compressor


    CEMENT MORTAR AND CONCRETE PERMEABILITY

    ASEW -173
    Permeability Testers, IS following 3085. Consists of the following
    a. Permeability Cell-Consists of a metal cylinder with a ledge at the bottom for retaining the specimen, a flange at the top, removable cover plate and a funnel. A rubber or neoprene 0-ring or gasket, seated in matching grooves, between the cell and the cover plate to render the joint water-tight.

    b. Water Reservoir-Consists of a length of metal pipe, 50 to 100mm in diameter and about 500 mm long. The reservoir fitted with a graduated side arm gauge-glass, and the necessary fitting and valves for admitting water and compressed air and for drainage, bleeding and connection to the permeability cell.

    c. Pressure Lines Heavy duty armoured rubber hose with end fittings. Complete with glass bottles but without compressor.

      * Single Cell Model: for specimen size 100 mm diax 100 mm high
      * Three Cell Model: for specimen size 100 mm diax 100 mm high
      * Single Cell Model: for specimen 150 mm diax 150 mm high
      * Three Cell Model: for specimen 150 mm dia x 150 mm high
      * Three Cell Model: for specimen size 150mm cube. Cell made of Cast Iron /M.S.
      * Three Cell Model: for specimen size 150 mm cube. Cell made of gunmetal.

      Accessories
      Air Compressor, high pressure 5 kg/cm2 to 15 kg/cm2. fitted with regulating valves pressure gauges and safety valve.

    Cement Concrete

    Cement Concrete

    Product code :    ASEW_165
     
    ASEW -164
    Concrete Mixer, Laboratory Model, Motorised:
    Light weight Laboratory Concrete mixer is designed to remove the burdensome work of hand mixing Uniform, thoroughly mixed batched can be produced in the field of laboratory.

    The counterbalanced mixing drum is easy to tilt. Tow cubic feet mix capacity. Tool drum volume is 2 cubic feet. Mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. Equipped with end towing pole.
    Suitable for operation on 440 volts, 3 phase, 50 cycles A.C. supply

    ASEW -165
    Concrete Mixer, Laboratory Model: Hand

    Cement Concrete

    Cement Concrete

    Product code :    ASEW_182
     
    ASEW -182
    Flow Table, Manually operated: IS: 5512.BS:4551-1, ASTMC230
    The Flow Table consists of a brass table top 250±2.5 mm dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to drop through 12 mm by a ground and hardened cam.

    ASEW -183
    Flow Table, Motorized
    Same as ASEW-182 but cam shaft is rotated at the rate of 100 r.p.m. by an electric motor. Suitable for operation on 230 Volts, 50 cycles, single phase, A.C. Supply.

    Spares:
    Flow Mould.

    ASEW -184
    Flow Table : IS 6932 (Part VIII) Consists of a steel table top 300 mm dia ground and polished with three inscribed annular circles 70, 110 and 190 mm dia arranged by cam action have a free fall of 12.5 mm. Complete with conical mould 65mm dia of larger end, 40 mm dia of narrow end and 90 mm high.

    Cement Concrete

    Cement Concrete

    Product code :    ASEW_174
     
    ASEW -174
    Blain Air Permeability Apparatus IS : 4031, IS : 5516, ASTMC204,BS:4359 part2 The apparatus comprises one each of Permeability Cell, 'U' tube manometer with stop cock on a sunmica wooden stand, perforated metal disc, plunger. Rubber stopper, Rubber tube with rubber bulb.

    Accessories:
    * Dibutylphthalate liquid. (500 gram bottle).
    * Punch.

    Spares:

    * Sunmica wooden stand with 'U' tube manometer with stop cock.
    * Permeability Cell complete with perforate metal disc, non-perforated disc and plunger.

    Cement Concrete

    Cement Concrete

    Product code :    ASEW_157
     
    ASEW -157
    Le-chatelier mould complete with two glass plate and one lead weight IS: 4031, IS: 5514; BS 6463 – 44

    Showing 1 - 6 of 6